Difference between revisions of "GameCube Controller"

From Rare Gaming Dump
(initial for versions)
m
Line 5: Line 5:
 
'''The WaveBird Wireless Controller''' is a radio frequency-based wireless controller based on the same design as the standard controller. It communicates with the GameCube system wirelessly through a '''receiver dongle''' connected to one of the system's controller ports. It is '''powered by two AA batteries'''. As a power-conservation measure, the WaveBird lacks the rumble function of the standard controller. The WaveBird came in two colors, grey and silver (Platinum).
 
'''The WaveBird Wireless Controller''' is a radio frequency-based wireless controller based on the same design as the standard controller. It communicates with the GameCube system wirelessly through a '''receiver dongle''' connected to one of the system's controller ports. It is '''powered by two AA batteries'''. As a power-conservation measure, the WaveBird lacks the rumble function of the standard controller. The WaveBird came in two colors, grey and silver (Platinum).
  
== Versions ==
+
==Versions==
 
The GameCube/Wii SDK [[PAD]] library defines six firmware revisions of the controller, although more than six revisions are known to exist with physical differences and the same firmware.
 
The GameCube/Wii SDK [[PAD]] library defines six firmware revisions of the controller, although more than six revisions are known to exist with physical differences and the same firmware.
 +
 +
== 1999 Breadboard ==
 +
The 1999 breadboard is the earliest version of the GameCube controller that has been found by collectors. It is a bare board without a case.
 +
 +
== DS3 ==
 +
The DS3 is a GameCube controller prototype with no D-pad or Z button.
 +
 +
== DS4 ==
 +
The DS4 is a GameCube controller prototype with no Z button.
 +
 +
== DS5 ==
 +
The DS5 is a GameCube controller prototype with an identical firmware and button layout to the final controller but slight cosmetic differences (such as a bean shaped B button).

Revision as of 04:52, 25 June 2020

This is the original gamecube controller

The GameCube controller is the standard game controller for the GameCube home video game console. Manufactured by Nintendo, it was released on September 14, 2001 in Japan, on November 18, 2001 in North America and in May 2002 in Europe and Australia. It was also re-released on the international launch of Super Smash Bros. for Wii U and the PAL launch of its successor, Super Smash Bros. Ultimate.

WaveBird Wireless Controller

The WaveBird Wireless Controller is a radio frequency-based wireless controller based on the same design as the standard controller. It communicates with the GameCube system wirelessly through a receiver dongle connected to one of the system's controller ports. It is powered by two AA batteries. As a power-conservation measure, the WaveBird lacks the rumble function of the standard controller. The WaveBird came in two colors, grey and silver (Platinum).

Versions

The GameCube/Wii SDK PAD library defines six firmware revisions of the controller, although more than six revisions are known to exist with physical differences and the same firmware.

1999 Breadboard

The 1999 breadboard is the earliest version of the GameCube controller that has been found by collectors. It is a bare board without a case.

DS3

The DS3 is a GameCube controller prototype with no D-pad or Z button.

DS4

The DS4 is a GameCube controller prototype with no Z button.

DS5

The DS5 is a GameCube controller prototype with an identical firmware and button layout to the final controller but slight cosmetic differences (such as a bean shaped B button).